【Scope of Application】
Shengli SL-580B
multi-purpose full-frequency pipeline detector is the ideal equipment specially
detecting various kinds of pipelines for oil (gas) transportation, water
supply, drainage, gas, heat, and industry, etc. and various cables for
electricity and telecommunication, etc. used by such underground pipeline
design organizations as professional pipeline detection, pipeline management
and maintenance, municipal administration planning and construction , power
supply, building and construction. It’s also the optimum replacement for
traditional underground pipeline detectors.
【Characteristics】
1. DSP processor
used to provide a fast calculation speed and a high accuracy;
2. The orientation
function to indicate the pipeline running direction, making location faster;
3. Adoption of the
10W broadband transmitter, applicable to various environments;
4. With the Lithium
battery supplying power for both the receiver and the transmitter, being
environmentally friendly;
5. The display is
backlighted, applicable to night emergency rescue;
6. Indication with
left and right arrows, able to rapidly locate the pipeline;
7. Front and back
arrows and dB values to indicate the location of the damaged points on coatings
during detection of the damaged points on coatings.
【W(wǎng)orking Principles】
Pipeline location
and depth investigation principle:
Shengli SL-580B
multi-purpose full-frequency pipeline detector detects underground pipelines
electromagnetically, which applies signals to metal pipelines through the
transmitter, generates pipeline current in metal pipelines and secondary
magnetic field around pipelines, and measures the secondary magnetic field of
pipelines on ground through the receiver, in order to accurately determine the
location, buried depth, running direction, route, and signal current intensity
of pipelines.
Leakage testing on
anti-corrosive coatings principles
An electrical
signal is sent to the underground metal pipeline through the transmitter. In case
damaged points exist on the underground pipeline coating, they are
short-circuited with the earth, generating creepage current radiating all around,
with the most intensive radiation above the damaged points. Based on that, the
damaged points on coatings are found.
【Technical Parameters】
Transmitter:
Function: to apply
the location signal of a certain frequency onto the pipeline
Output modes:
induction, direct link, clamping
Various frequencies:
128Hz, 512Hz, 1KHz, 2KHz, 8KHz, 33KHz, 65KHz, 83KHz
Frequency
configuration at various modes:
Induction mode: 65KHz, 83KHz
Direct link mode: 128Hz,
512Hz, 1KHz, 2KHz, 8KHz, 33KHz, 65KHz, 83KHz
Clamping mode: 33KHz
Maximum power output:
10W
Maximum voltage output:
60V
Maximum current output:
1A
Power supply: dual
power, Lithium battery pack (energy-efficient and environmental-friendly)
Continuous working
time:
1W 12 hours
5W 8 hours
10W 5 hours
Weight: 2.6kg
Ambient temperature:
-20℃-50℃
Quality standard: ISO9001：2008
Receiver:
Purpose: location
of underground pipelines and cables (able to determine position, running
direction, depth, and current of underground pipelines)
Location modes:
Peak mode: two
horizontal coils are used
Broad peak mode:
one horizontal coil is used
Valley mode: one
vertical coil is used, having the function of left and right orientation
Receive frequency:
50Hz, 100Hz, radio, 128Hz, 512Hz, 1KHz, 2KHz, 8KHz, 33KHz, 65KHz, and 83KHz
Gain control:
automatic gain, range of 0-100dB
Location accuracy:
5% of depth (range of depth 0-3m)
10% of depth (range of depth ＞3m）
Measurement
accuracy of currents: ≤5% of actual current
Measuring range:
0-6m
Power supply: Lithium
battery pack (energy-efficient and environmental-friendly)
Working time: an
average of 8 hours
Weight: 1.8kg
Ambient
temperature: -20℃-50℃
Quality standard: ISO9001：2008
【Standard Configuration】
10W broadband
large-power transmitter, full-frequency receiver, A-type bracket, clamp, direct
link line, earthing bar, transmitter charger, receiver charger, packing box,
and user’s manual.
